Tooling for EDM
397 Ergebnisse für 'Tooling for EDM'
Drawbar, MacroJunior
3R-405.11E
Drawbar Ø15 mm to mount MacroJunior holders in chucks 3R-400.XX and 3R-460.XX.
Clamping force meter kit, Macro
3R-SSP115-BASE
For both pneumatic and manual chucks. This stand alone unit in combination with individual drawbars or drawbar kits, able to cover MacroJunior, Macro, MacroMagnum and Dynafix. Note: Require drawbars with bayonet interface similar to 3R-605.1.
Lathe taper
3R-TXXXX
Taper attachment for mounting chucks in taper spindles. Note: Manufactured on request. State machine type, taper (1), drawbar thread (2) and which 3R chuck is to be mounted.
Angle shelf
3R-A21944
For vertical or horizontal mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on the machine table. Intended for milling. Note: Chuck to be ordered separately.
Adapter plate
3R-A19724
For mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on machine table. Note: Chuck to be ordered separately.
Manual chuck adaper, Midi-Mini
3R-321-4x90º
Hydraulic chuck for mounting on machine spindle with Midi system.
Reference tables, 3Refix
3R-936-60.38
Reference tables of structurally-stable toughened steel (270-320 HB). Hardened bushes in dead-end holes for 3Refix mandrels Ø20 mm at 100x100 mm modular spacing, as well as M12 tapped mounting holes with 50x50 mm modular spacing. Note: Customised reference tables can be made to order. Note: Hardened reference tables (650-700 HB) can be made to order.
3Refix mandrel, 3Refix
3R-901-10RS
Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.
3Refix mandrel, 3Refix
3R-901-20E
Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.