Tooling for EDM
397 Ergebnisse für 'Tooling for EDM'
Drawbar, Matrix185
3R-695.2-185
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Drawbar, Matrix220
3R-695.2-220
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Drawbar, Matrix260
3R-695.2-260
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Manual chuck, MacroHP
3R-600.24-4RS
Rust resistant chuck for Macro holder. Mounts on a suitable fixture.
Rotating spindle, Macro
3R-6.600-VHS
For clamping in a horizontal or vertical Macro chuck. Flushing via the spindle or an external flushing connection.
Pneumatic chuck, MacroJunior
3R-410.1-M
For mounting on the machine spindle or in a fixture on the machine table.
Manual chuck, MacroCombi
3R-460.34
For mounting in the machine spindle by means of 3R-A11489, or on the machine table by means of 3R-A19724 or alternatively 3R-A21944, or in a fixture.
Manual chuck adapter 90°, Macro-Macro
3R-652.9
For horizontal mounting of Macro holders. Supplied with drawbar for screw locking.
Manual chuck adapter 90°, Macro-MacroJunior
3R-406.9
For horizontal mounting of MacroJunior holders in the Macro system. Screw locking.
Holder with journal, MacroJunior
3R-461.1E-GA
Holder with journal , 3R-461.1E-GA Journal Ø10x10 mm. Intended mainly for graphite electrodes. To be mounted on 3R-491E with three MFT4x12 screws and adhesive.
Plate 5.5 mm, MacroJunior
3R-SP19270
Used in combination with 3R-491E when electrode blanks are mounted with adhesive and screws*. Permits mounting in MacroCombi chucks.