Tooling for wire EDM
144 Ergebnisse für 'Tooling for wire EDM'
Vice, Wire EDM
3R-294.1
For clamping workpieces up to 17 mm. Mounts on 3R-237.2, 3R-294, 3R-292.66HP or rulers in the 3Ruler system.
Multiple holder, Wire EDM
3R-294.6
For mounting four workpieces Ø5-13 mm at the same time. Mounts on 3R-237.2, 3R-294, 3R-292.66HP or a ruler in the 3Ruler system.
Miniclamps, Wire EDM
3R-239.24
For clamping thin workpieces. To be fitted together with zero-line support tab.
Clamps, Wire EDM
3R-A239
Clamps of aluminium for mounting a ruler directly on the machine table without reference elements.
Swivelling element 360°, Wire EDM
3R-203
Hydraulic locking of set position. Note: For angle setting, 3R-216 is recommended.
Spacer element 30 mm, Wire EDM
3R-223
Used where vertical or horizontal displacement of workpiece or accessory is necessary.
Spacer element 30 mm, Wire EDM
3R-223.3
Used where vertical or horizontal displacement of workpiece or accessory is necessary.
Swivelling element 360°, Macro
3R-203.66
Swivelling element with manual Macro chuck to be mounted onto a Macro chuck. Mecanical locking of the set position. Vernier scale for quick setting in 0.1-degree steps. Note: For angle setting sine ruler 3R-216.6 and gauge block are recommended.
Swivelling element 360°, Macro
90937
Swivelling element with manual Macro chuck to be mounted onto leveling heads. Mecanical locking of the set position. Vernier scale for quick setting in 0.1-degree steps. Note: For angle setting sine ruler 3R-216.6 and gauge block are recommended.