Tooling for parts production
416 Ergebnisse für 'Tooling for parts production'
3Refix mandrel, 3Refix
3R-901-10E-TX
Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.
Rotating spindle, Macro
3R-6.300-EHS16
For clamping in a vertical Macro chuck. Flushing via flushing connection. Recommended collets - Balzer EHS16, Regofix ER16 or Tecnopinz ETS16.
Pneumatic chuck, MacroHP
3R-SP7359
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.
Pneumatic chuck, MacroHP
3R-SP7359-RS
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.
Pallet 52x52 mm, MacroHP
3R-651.3
Hardened, with 3Refix holes, flushing connection and clearance holes for two fixing screws.
Manual chuck adapter, Matrix110-Ø20
3R-SP31380-RS
Intended to fit cut tools with Ø20 mm. Also adapted to fit System 3R Mini electrode holders with Ø20 mm.
Holder 54x54 mm, Macro
3R-658.2E-S
Unhardened holder for flat electrodes with max width 30 mm. To be mounted on 3R-651.7E-S, 3R-651.7E-XS or 3R-651.7E-P.
Pneumatic built-in chuck, Matrix142
3R-SP28219-RS
Rust resistant chuck for permanent mounting in the machine table.
Drawbar, Matrix142
3R-695.2-142RS
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Collet chuck ER20, Matrix142
3R-699.20-142D
The pallet can be flipped over to gain access from rear side.