Tooling for parts production
416 Ergebnisse für 'Tooling for parts production'
Pneumatic chuck, MacroHP
3R-SP7359
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.
Pneumatic chuck, MacroHP
3R-SP7359-RS
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.
Pallet, Ø116 mm, MacroHP
3R-601.52
Hardened, with 3Refix holes and clearance holes for ten fixing screws.
Pallet, Ø116 mm, Macro
3R-608.51E
Unhardened with 3Refix holes and four M6 threads. Designed to be mounted on 3R-601.3 or 3R-601.52.
Sealing ring, High, Macro
3R-612.116-A
Suitable for some Macro chucks with drawbar 3R-605.1*. Note: Only suitable for Ø116 mm pallets.
Manual chuck adapter, Matrix110-Ø20
3R-SP31380-RS
Intended to fit cut tools with Ø20 mm. Also adapted to fit System 3R Mini electrode holders with Ø20 mm.
Pneumatic built-in chuck, Matrix142
3R-SP28219-RS
Rust resistant chuck for permanent mounting in the machine table.
Drawbar, Matrix142
3R-695.2-142RS
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Collet chuck ER20, Matrix142
3R-699.20-142D
The pallet can be flipped over to gain access from rear side.
Collet chuck ER40, Matrix142
3R-699.40-142D
The pallet can be flipped over to gain access from rear side.